HP Network Direr Software Products manual Classification

624CHAPTER 15: PRIORITIZING NETWORK TRAFFIC

Key Concepts	Traffic prioritization has three basic aims:
	■ To ensure that traffic defined as being more important flows through
		the network quicker than other types of traffic.
	■ To ensure that important traffic is less likely to be dropped if there is
		congestion on the network.
	■ To prevent traffic that has been blocked from flowing on the network.
	In order to achieve the aims of traffic prioritization across the network,
	each Switch in the network must provide facilities for:
	■ Performing identification of the most important traffic and traffic that
		should be blocked. This is known as classification.
	■ Performing suitable actions as a result of classification to meet the
		needs of the particular traffic type that classification identified. There
		are three actions that can be performed; marking, queuing and
		dropping.
Classification	Classification identifies different types of traffic by examining the
	contents of a packet or set of packets. For example, a packet received by
	a device can be identified as traffic to and from your database server if
	the destination or source IP address in the packet matches the IP address
	of the database server.
	There are many fields in a packet that a device may use to classify traffic,
	including:
	■	Ethernet type
	■ Source or destination MAC address
	■	IP protocol
	■ Source or destination TCP port
	■ Source or destination UDP port

Classification can also be much more complex than simply examining a field in a packet. It can involve examining multiple fields in a packet, parsing and analyzing the contents of a packet, or even analyzing flows of traffic rather than a single packet.