HP Network Direr Software Products manual Trap Destination Table Entries, Parameter Description

602CHAPTER 14: BULK CONFIGURATION

Figure 327 Trap Destinations Panel

The trap destination table will only be applied as part of the configuration template if the associated checkbox is checked. The table defines the addresses to which the device will send SNMP traps, each entry has the following parameters:

Table 93 Trap Destination Table Entries

Parameter	Description
IP Address	The IP address of the device to which SNMP traps should
	be sent.
Community String	The community string has a maximum length of 30
	characters.
Owner	A description of the owner of this trap destination entry.
	Maximum length 128 characters.

In a new configuration template the table will be empty. New trap destination entries can be added to the list, one at a time, by clicking the Add button.

A maximum of eight entries can be added to the table. The IP address, community string and owner string for any of the entries in the list can be modified, by selecting the desired entry in the list and clicking the Edit button.