HP Network Direr Software Products manual Configuring Trap Destinations

Components 601

Figure 326 System Information Panel

The system information parameters will only be applied as part of the configuration template if the associated checkboxes are checked.

To specify a string for the system name parameter choose Custom from the associated drop down list and enter the text into the field that becomes enabled. Alternatively, the system name parameter can be chosen to match the DNS name of each device, or to match the name currently shown in the map for each device. The strings to use for the location and contact parameters must be explicitly specified. The System Information feature limits the length of any strings entered to a maximum of 30 characters.

Configuring Trap Destinations

The Trap Destination feature allows the user to configure the list of destination addresses that the devices will send traps to whenever an important event occurs.