HP Network Direr Software Products manual Selecting Properties

224CHAPTER 5: WORKING WITH THE MAP

4Having added the switch, close the Add Map Item dialog, right-click on the new icon and select Properties from the pull-right menu.

Figure 94 Selecting Properties

Use the Properties dialog to set the IP address of the new device. For more information about how do this see “Setting the IP Address for a Manually Added Device” on page 255.

As well as adding in the switch to the map using the Add Map Item dialog, you could also add the switch by rediscovering the subnet that the switch is present on. If you have configured a scheduled discovery then this will happen automatically the next time the scheduled discovery discovers the subnet. For more information about how to rediscover subnets and schedule discoveries see “Discovering the Network” on page 319.