HP Network Direr Software Products Tools Network Discovery with an undiscovered subnet selected

Components 109

Tools > Network Discovery with an undiscovered subnet selected

If you have already performed a discovery operation, and a router was detected during that discovery, then it is likely that you will have some undiscovered subnets on your map. These subnets will be those to which the router is directly attached and were not specified in the original discovery.

Figure 28 Undiscovered Subnet

If you select one or more of these subnets in the map or the tree and select Network Discovery from the Tools menu, the Network Discovery wizard will be launched at the Specify Subnets pane. As with selecting an existing subnet, the subnet information will be included in the list. The range information will always default to All, although you can change this if you wish by selecting the desired subnet in the list and clicking the Edit button.

As with selecting discovered subnets, if you select an undiscovered subnet in the tree or the map the right-click menu contains the Network Discovery option. Selecting this has the same effect as selecting Network Discovery from the tools menu.

You can also launch the Network Discovery wizard for an undiscovered subnet by double-clicking on its icon in the map or tree. This has the same effect as selecting Network Discovery from the tools menu.

The Network This step-by-step guide takes you through the Network Discovery wizard Discovery Wizard in order to customize the discovery process. When you complete the

wizard the discovery process will be started.

If you have previously created a network map, you can use this wizard to rediscover all of your network, part of it, or discover a completely new part. The discovery process verifies the devices and links on the network map and incorporates any changes. To do this, you must open the map before starting the wizard.