HP Network Direr Software Products manual Servers Restricting Access to Snmp Example

648CHAPTER 15: PRIORITIZING NETWORK TRAFFIC

9Repeat steps 7 and 8 to add in the remaining classifiers (in this case, UDP port 2002 and UDP port 2003).

10Click OK to return to the Setup Applications dialog.

11Click OK again to return to the Applications screen where the video conferencing application is now listed in the Normal list.

12Select the video conferencing application from the Normal list. Select Set Prioritized.

13Click Next to display the next step of the wizard. If the Resource Warning screen is displayed then you may wish to resolve the resource warning before proceeding. Refer to “Resource Warnings” on page 657 for more information.

14When you reach the Configuration Summary step, click Finish to apply the updated configuration to the supported 3Com devices in the map.

Restricting Access to For security purposes you wish to restrict the use of SNMP in your SNMP network to the PCs used by the network managers.

1In the Introduction step, click Next. The wizard will analyze the devices in your map and display the Configuration Type step as shown in

Figure 350.

2Select the Network-wide configuration radio button and click Next to display the Servers step as shown in Figure 356.

Figure 356 Servers - Restricting Access to SNMP Example