HP Network Direr Software Products manual Appendix F Adding Trap Decodes

886APPENDIX F: ADDING TRAP DECODES

For example, the following would be valid trap decode definitions:

;a3Com_swModuleVerMismatchNotification [1.3.6.1.4.1.43.47.2.1.0.57]

name= a3Com_swModuleVerMismatchNotification

description= Unit software version {2} mismatch. Expected version is {1}

explanation= This trap is sent when the software versions on two units \

in the stack do not match.\

<remedy>Update the agents running on the units in the stack so they are \

running the same version</remedy> severity= warning

;a3ComPsePortCurrentStatusTrap - For Switch 4400 PWR [1.3.6.1.4.1.43.0.142]

name= a3ComPsePortCurrentStatusTrap

description= Port Power over Ethernet current status changed. explanation= A current port status related to Power over Ethernet has \

changed to {0,choice,\

1#OK. Neither an under current or over current condition has

\

been detected.\

2#Over Current. The port current exceeds the maximum threshold.\

3#Over Current. The port current exceeds the maximum threshold.\

6#Invalid Power over Ethernet Device. An invalid powered device \

has been detected and will not be delivered power.} severity= {0,choice, 1#info2#high3#high6#warning}