HP Network Direr Software Products manual Icons Used in the Map, IconDescription

Key Concepts 153

Table 12 Icons Used in the Map

IconDescription

A diamond icon represents a router or a layer-3 switch. The image within the diamond will indicate the type of the router or layer-3 switch. For more information see “Device Icons” on page 158.

An octagonal icon represents a network infrastructure device, such as a switch, hub, wireless access point, or NBX call processor. The image within the octagon indicates the type of the network infrastructure device. For more information see “Device Icons” on page 158.

Devices that form the components of an XRN Switching Fabric are grouped together into a single XRN Fabric icon in the map.

A square represents any other discovered device on the network. This includes end stations, servers and NBX phones. It also includes devices that could not be discovered fully, for example when 3Com Network Director cannot determine an IP address for a device, or when the appropriate SNMP community strings are not supplied to 3Com Network Director in the Network Discovery wizard. The image within the square indicates the type of the device. For more information see “Device Icons” on page 158.

A triangle represents the PC that 3Com Network Director is running on. The image within the triangle indicates the type of PC. For more information see “Device Icons” on page 158.