HP Network Direr Software Products manual Scheduled Discovery Pane

Examples 137

Figure 50 Scheduled Discovery Pane

,

4This will launch the Tools > Options dialog box at the Discovery tab. Enter information into this dialog box as in the above example and click OK to return to the Network Discovery wizard.

5Complete the wizard as normal and click Finish.

A discovery will be started immediately, discovering the required subnets. At midnight the discovery will be repeated, and subsequently each day at midnight. If you are concerned that the initial discovery may be inaccurate, due to your network being very busy at the time you perform this discovery, this should not be too much of an issue. Assuming the discovery is able to detect all the relevant subnets during the first discovery, any missing devices should be discovered during the scheduled discovery at the quieter time.

I have four separate While 3Com Network Director is capable of automatically discovering subnets - how do I your local subnet and its immediate neighbors, you may only want to

specify them? discover selected subnets. In the following example, you want to specify four subnets. To do this:

1Launch the Network Discovery wizard (e.g. by selecting Tools > Network Discovery).

2On the first pane of the wizard, select the Specify Subnets radio button and click Next