Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper 421622BVE important safety instructions Battery Service, Battery Storage, Battery Testing

Models: 421622BVE

1 36
Download 36 pages 19.48 Kb
Page 26
Image 26

Section 4 - ADJUSTMENTS & REPAIR

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda. DO NOT attempt to charge battery while installed on the machine. DO NOT use “BOOST” chargers on the battery.

4.6.3. BATTERY SERVICE

1.Remove battery. See Section on Battery Removal

2.Place battery in a well ventilated area on a level surface.

3.Using distilled water, refill cells as required to cover cell plates of which can also be visualized through the plastic battery case.

4.With cell caps removed, connect battery charger to battery terminals. Red to positive (+) terminal and black to negative (-) terminal.

5.Slow charge battery at 1 amp for 10 hours.

6.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery.

4.6.4. BATTERY STORAGE

If mower is to be stored out of season on its rear bumper, it is recommended the battery be removed, charged and stored.

1.Remove battery. (Refer to Section “BATTERY REMOVAL”).

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the RIDER on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

4.6.5.NEW BATTERY PREPARATION 1. Remove battery from carton.

2. Place battery in a well ventilated area on a level non-concrete surface.

3. Remove battery cell caps. Fill cells as required with electrolyte (purchased separately) to proper level. Fill to 3/16” above cell plates. Filling battery with electrolyte will bring the battery to 80% charged state.

4. With cell caps removed, connect battery charger to battery terminals; RED to positive (+) and BLACK to negative (-) terminal.

IMPORTANT: 3/16” above cell plates is the recommended level. DO NOT place anything in battery other than specified electrolyte.

WARNING

DO NOT attempt to charge battery while installed on the Riding Mower. DO NOT use “BOOST” chargers on the battery. DO NOT OVERFILL!

5.Slow charge the battery at 1 amp for 2 hours to bring the battery to full charge.

6.After charging, check level of electrolyte and add as needed to bring level to 3/16” above cell plates.

7.Reinstall cell caps.

8.Install battery into power unit. Refer to Section

“BATTERY INSTALLATION”.

9.Connect positive (+) cable (red) first, from wiring harness to the positive terminal (+) on battery using bolt and nut provided in hardware bag. Connect negative (-) cable (black) last, to negative terminal (-) on battery using bolt and nut. Apply a small amount of grease over terminals to prevent corrosion.

WARNING

Shield the positive terminal with terminal cover located on battery harness. This prevents metal from touching the positive terminal which could cause sparks.

4.6.6.BATTERY TESTING

There are two types of battery tests: Unloaded and Loaded. The unloaded test is the procedure that will be discussed. It’s the simplest and most commonly used. An unloaded test is made on a battery without discharging current. To perform unloaded testing, check charge condition using either a hydrometer or voltmeter.

1.Using a voltmeter, voltage readings appear instantly to show the state of charge. Remember to hook the positive lead to the battery’s positive terminal, and the negative lead to the negative terminal.

2.A hydrometer measures the specific gravity of each cell. The specific gravity tells the degree of charge; generally, a specific gravity of about 1.265 to 1.280 indicates full charge. A reading of 1.230 to 1.260 indicates the battery should be charged. The chart on the next page shows the charge level as measured by syringe float hydrometer, digital voltmeter and five ball hydrometer.

(Battery Testing Chart on Next Page)

26

Page 25 Page 27
Page 26
Image 26
Snapper 421622BVE Battery Service, Battery Storage, NEW Battery Preparation 1. Remove battery from carton, Battery Testing
Page 25 Page 27

421622BVE specifications

The Snapper 421622BVE is a versatile and powerful lawn mower designed for both residential and commercial use, making it an excellent choice for groundskeepers and homeowners alike. This mower blends performance and durability with innovative features that set it apart in the competitive lawn care market.

One of the standout features of the Snapper 421622BVE is its robust engine. It is powered by a reliable 150cc Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and requires minimal maintenance, allowing users to spend more time mowing and less time dealing with equipment issues.

The mower is equipped with a 21-inch cutting deck, which offers a perfect balance between maneuverability and cutting efficiency. This size is especially beneficial for homeowners with smaller to medium-sized yards. The cutting deck features a three-in-one design that allows users to switch between bagging, mulching, or side discharging grass clippings, depending on their preference and lawn care needs.

Another notable characteristic of the Snapper 421622BVE is its ergonomic design. The handle is adjustable, allowing users of varying heights to find a comfortable grip while mowing. This feature helps reduce operator fatigue, which is especially important during extended mowing sessions. Additionally, the mower’s lightweight construction makes it easy to maneuver around obstacles in the yard.

The Snapper 421622BVE also incorporates several cutting technologies that ensure a clean and even cut. The patented variable-speed rear-wheel drive system provides excellent traction and control, allowing users to tackle hills and slopes with ease. The dual-bearings in the wheels enhance durability, ensuring that the mower can withstand rugged use.

Safety features are paramount in the design of the Snapper 421622BVE. It includes a safety key that must be inserted to start the mower, preventing unauthorized use. The blade brake feature ensures that the blades stop quickly when the operator releases the handle, providing additional safety for the user.

In conclusion, the Snapper 421622BVE is a well-rounded lawn mower that combines power, efficiency, and safety features into an exceptional package. Its robust engine, versatile cutting options, ergonomic design, and innovative technologies make it a perfect choice for anyone looking to maintain a healthy and beautiful lawn.