Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper 421622BVE Starting & Operation, Engine Electric Start, Engine Manual Start

Models: 421622BVE

1 36
Download 36 pages 19.48 Kb
Page 8
Image 8

Section 2 - OPERATING INSTRUCTIONS

2.3STARTING & OPERATION

2.3.1. ENGINE (ELECTRIC START) (Continued)

8.Should the battery be too weak to start the engine, Refer to Section “ENGINE (MANUAL START)” to manually start the electric start engines.

2.3.2. ENGINE (MANUAL START)

IMPORTANT: When the ignition key is turned to “RUN”, and the recoil handle is pulled, the engine will turn over, but will not start unless the Clutch/Brake Pedal is pressed all the way down with Parking Brake engaged (See Figure 2.8) and the Blade Lever is in the “Off” position (See Figure 2.4). Start engine as follows:

1.Move transmission shift lever to (N) Neutral position. DO NOT start engine with transmission shift lever in a drive position.

WARNING

It is possible to start engine with transmission shift lever in a drive position. Follow starting instructions carefully.

2.Make certain the Blade Lever is in the “Off” position. See Figure 2.4.

3.Press Clutch/Brake Pedal all the way down, move Parking Brake Latch over and release the Clutch/Brake Pedal to engage the Parking Brake. See Figure 2.8.

TO START ENGINE,

PUSH CLUTCH/BRAKE

PEDAL ALL THE DOWN

4.Open vent on fuel filler cap by turning counterclockwise. NOTE: Failure to open vent on the fuel filler cap can cause engine to stall. See Figure 2.6.

5.Move engine speed control to the medium position and the choke control is in the choke position to start a cold engine. See Figure 1.1.

6.Turn key to “RUN” position. See Figure 2.9.

KEY

FIGURE 2.9

7.Pull starter rope with a smooth, even motion until engine starts. Always guide the starter rope back into the recoil housing. Never allow rope to snap back. After Engine starts, move engine speed control to the “FAST” position.

8.Allow a brief warm-up until engine runs smooth.

MOVE

PARKING

BRAKE

LATCH

OVER

FIGURE 2.8

8

Page 7 Page 9
Page 8
Image 8
Snapper 421622BVE important safety instructions Starting & Operation, Engine Electric Start, Engine Manual Start
Page 7 Page 9

421622BVE specifications

The Snapper 421622BVE is a versatile and powerful lawn mower designed for both residential and commercial use, making it an excellent choice for groundskeepers and homeowners alike. This mower blends performance and durability with innovative features that set it apart in the competitive lawn care market.

One of the standout features of the Snapper 421622BVE is its robust engine. It is powered by a reliable 150cc Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and requires minimal maintenance, allowing users to spend more time mowing and less time dealing with equipment issues.

The mower is equipped with a 21-inch cutting deck, which offers a perfect balance between maneuverability and cutting efficiency. This size is especially beneficial for homeowners with smaller to medium-sized yards. The cutting deck features a three-in-one design that allows users to switch between bagging, mulching, or side discharging grass clippings, depending on their preference and lawn care needs.

Another notable characteristic of the Snapper 421622BVE is its ergonomic design. The handle is adjustable, allowing users of varying heights to find a comfortable grip while mowing. This feature helps reduce operator fatigue, which is especially important during extended mowing sessions. Additionally, the mower’s lightweight construction makes it easy to maneuver around obstacles in the yard.

The Snapper 421622BVE also incorporates several cutting technologies that ensure a clean and even cut. The patented variable-speed rear-wheel drive system provides excellent traction and control, allowing users to tackle hills and slopes with ease. The dual-bearings in the wheels enhance durability, ensuring that the mower can withstand rugged use.

Safety features are paramount in the design of the Snapper 421622BVE. It includes a safety key that must be inserted to start the mower, preventing unauthorized use. The blade brake feature ensures that the blades stop quickly when the operator releases the handle, providing additional safety for the user.

In conclusion, the Snapper 421622BVE is a well-rounded lawn mower that combines power, efficiency, and safety features into an exceptional package. Its robust engine, versatile cutting options, ergonomic design, and innovative technologies make it a perfect choice for anyone looking to maintain a healthy and beautiful lawn.