Snapper 421622BVE Engine Adjustments & Repair, Mower Drive Belt Adjustment

Models: 421622BVE

1 36
Download 36 pages 19.48 Kb
Page 18
Image 18

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and vent must be closed securely to prevent fuel spillage.

4.1ENGINE ADJUSTMENTS & REPAIR

Refer to the engine owner’s manual for those adjustments and/or repairs that can be made by the owner.

4.2MOWER DECK & COMPONENT ADJUSTMENTS The following mower deck and component adjustments and repairs can be made by the owner. However, if there is difficulty in achieving these adjustments and repairs, it is recommended that these repairs be made by an authorized SNAPPER dealer.

WARNING

Once blade is disengaged it should come to a stop in 3 seconds or less. If the blade continues to rotate after 3 seconds the blade brake must be adjusted. DO NOT continue to operate the machine if the blade brake is not operating properly.

4.2.1. MOWER DRIVE BELT ADJUSTMENT

On 42” models, the mower drive belt DOES NOT require adjustment. If the belt does not drive blade properly, replace belt. See Figure 4.1 for belt routing.

TOP VIEW OF BELT ROUTING

LEFT

RIGHT

SPINDLE

SPINDLE

PULLEY

PULLEY

 

ENGINE DRIVE

PULLEY

ASSEMBLY

4.2.2. BLADE BRAKE ADJUSTMENT

The automatic Blade Brake should stop the blades within 3 seconds anytime the blades are disengaged by moving blade lever to the "OFF" position or by releasing the Blade Pedals. When the Blade Brake is properly adjusted there should be 1/16" to 1/8" clearance between the Blade Engagement Lever and the back of the Latch Plate. Check this by disengaging the Blade Lever and depressing the Blade Pedals as shown in Figure

4.2.If clearance is greater than 1/4" perform the following adjustment.

1. Remove mower drive belt cover.

2. Remove retaining pin from eye bolt swivel. Lift swivel out of deck rail. See Figure 4.3.

3. Turn eye bolt swivel CLOCKWISE to increase brake tension and reduce clearance between Blade Lever and Latch Plate.

4. Check clearance. Depress Blade Pedals, with Blade Lever disengaged. If clearance is greater than 1/8", rotate eye bolt swivel CLOCKWISE an additional turn and re-check clearance.

5. Once the 1/16" to 1/8" clearance has been attained, reinstall swivel onto deck rail. Insert retaining pin into eye bolt swivel.

6. Reinstall mower drive belt cover.

7. Verify that proper Blade Brake action has been restored. If not, contact your SNAPPER Dealer for inspection and repair.

BLADE ENGAGEMENT

LEVER

1/16” TO 1/8”

DIMENSION

NOTE: BLADE PEDALS

LATCH PLATE

 

ARE ENGAGED

 

FIGURE 4.2

WARNING

DO NOT operate machine until blade brake is adjusted and functioning properly. If blade stop time cannot be achieved with the adjustment procedure described above, take the machine immediately to an authorized SNAPPER dealer.

FIGURE 4.1

18

Page 18
Image 18
Snapper 421622BVE Engine Adjustments & Repair, Mower Drive Belt Adjustment, Blade Brake Adjustment

421622BVE specifications

The Snapper 421622BVE is a versatile and powerful lawn mower designed for both residential and commercial use, making it an excellent choice for groundskeepers and homeowners alike. This mower blends performance and durability with innovative features that set it apart in the competitive lawn care market.

One of the standout features of the Snapper 421622BVE is its robust engine. It is powered by a reliable 150cc Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and requires minimal maintenance, allowing users to spend more time mowing and less time dealing with equipment issues.

The mower is equipped with a 21-inch cutting deck, which offers a perfect balance between maneuverability and cutting efficiency. This size is especially beneficial for homeowners with smaller to medium-sized yards. The cutting deck features a three-in-one design that allows users to switch between bagging, mulching, or side discharging grass clippings, depending on their preference and lawn care needs.

Another notable characteristic of the Snapper 421622BVE is its ergonomic design. The handle is adjustable, allowing users of varying heights to find a comfortable grip while mowing. This feature helps reduce operator fatigue, which is especially important during extended mowing sessions. Additionally, the mower’s lightweight construction makes it easy to maneuver around obstacles in the yard.

The Snapper 421622BVE also incorporates several cutting technologies that ensure a clean and even cut. The patented variable-speed rear-wheel drive system provides excellent traction and control, allowing users to tackle hills and slopes with ease. The dual-bearings in the wheels enhance durability, ensuring that the mower can withstand rugged use.

Safety features are paramount in the design of the Snapper 421622BVE. It includes a safety key that must be inserted to start the mower, preventing unauthorized use. The blade brake feature ensures that the blades stop quickly when the operator releases the handle, providing additional safety for the user.

In conclusion, the Snapper 421622BVE is a well-rounded lawn mower that combines power, efficiency, and safety features into an exceptional package. Its robust engine, versatile cutting options, ergonomic design, and innovative technologies make it a perfect choice for anyone looking to maintain a healthy and beautiful lawn.