Section 3 - MAINTENANCE

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and vent must be closed securely to prevent fuel spillage.

3.5EVERY TWO YEARS

In addition to regular maintenance, the following components of the Rear Engine Rider should be carefully inspected every two years for wear or damage. Replace worn or damaged parts with genuine SNAPPER replacement parts available from an authorized SNAPPER dealer.

3.5.1.All bushings and pivot areas.

3.5.2.Check both front wheel king pins.

3.5.3.Transmission shift lever and detent.

3.5.4.Clutch Disc.

3.5.5.Clutch Yoke.

3.5.6.Mower deck linkage and pivot areas.

3.6STORAGE (OUT OF SEASON)

If desired, the Rear Engine Rider can be stored on the rear bumper. Perform the following procedures to insure the Rear Engine Rider will operate properly when taken out of storage.

3.6.1.Thoroughly clean the Rear Engine Rider by removing all grass clippings and debris.

3.6.2.Perform maintenance and lubrication as required.

3.6.3.Drain fuel from fuel tank.

3.6.4.Start engine and allow it to run until engine runs out of fuel. This allows the carburetor and fuel system to remain clean during storage.

3.6.5.Remove battery. Refer to Section

“BATTERY STORAGE”.

3.6.6.Close vent on fuel filler cap.

3.6.7.Carefully stand Rear Engine Rider on rear bumper in desired location for storage.

3.7REMOVING FUEL TANK

Before removing fuel tank from rear engine rider, move rider outdoors where fumes can be easily dissipated. Removal of the tank is accomplished from the left side of the machine by pulling the tank straight up and away from the fuel tank bracket. Holding the fuel tank, remove the fuel filler cap and pour remaining fuel in an approved container. See Figure 3.10.

FUEL

FILLER

CAP

FUEL TANK

FUEL TANK

BRACKET

FIGURE 3.10

17

Page 16 Page 18
Page 17
Image 17
Snapper 421622BVE important safety instructions Every TWO Years, Storage OUT of Season, Removing Fuel Tank
Page 16 Page 18

421622BVE specifications

The Snapper 421622BVE is a versatile and powerful lawn mower designed for both residential and commercial use, making it an excellent choice for groundskeepers and homeowners alike. This mower blends performance and durability with innovative features that set it apart in the competitive lawn care market.

One of the standout features of the Snapper 421622BVE is its robust engine. It is powered by a reliable 150cc Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and requires minimal maintenance, allowing users to spend more time mowing and less time dealing with equipment issues.

The mower is equipped with a 21-inch cutting deck, which offers a perfect balance between maneuverability and cutting efficiency. This size is especially beneficial for homeowners with smaller to medium-sized yards. The cutting deck features a three-in-one design that allows users to switch between bagging, mulching, or side discharging grass clippings, depending on their preference and lawn care needs.

Another notable characteristic of the Snapper 421622BVE is its ergonomic design. The handle is adjustable, allowing users of varying heights to find a comfortable grip while mowing. This feature helps reduce operator fatigue, which is especially important during extended mowing sessions. Additionally, the mower’s lightweight construction makes it easy to maneuver around obstacles in the yard.

The Snapper 421622BVE also incorporates several cutting technologies that ensure a clean and even cut. The patented variable-speed rear-wheel drive system provides excellent traction and control, allowing users to tackle hills and slopes with ease. The dual-bearings in the wheels enhance durability, ensuring that the mower can withstand rugged use.

Safety features are paramount in the design of the Snapper 421622BVE. It includes a safety key that must be inserted to start the mower, preventing unauthorized use. The blade brake feature ensures that the blades stop quickly when the operator releases the handle, providing additional safety for the user.

In conclusion, the Snapper 421622BVE is a well-rounded lawn mower that combines power, efficiency, and safety features into an exceptional package. Its robust engine, versatile cutting options, ergonomic design, and innovative technologies make it a perfect choice for anyone looking to maintain a healthy and beautiful lawn.
Top Page Image Contents