Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper 421622BVE PRE-START Check List, OPERATOR’S Seat Adjustment Front to Rear Adjustment

Models: 421622BVE

1 36
Download 36 pages 19.48 Kb
Page 6
Image 6

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check tires and add or release air as needed to bring pressure to 12 psi in front and 12 psi in rear tires.

2.1.2.Check guards, deflectors and covers to make sure all are in place and securely tightened.

2.1.3.Check engine oil and add oil as needed to bring level up to the FULL mark. Refer to engine owner’s manual for oil specifications. See Figure 2.1.

SAFE LEVEL

AREA

FIGURE 2.1

2.1.4.Adjust seat as needed to most comfortable position. Refer to Section “OPERATOR’S SEAT ADJUSTMENT”. See Figure 2.3.

2.1.5.Check blade control to insure it works freely. If blade pedals are depressed, blade lever can be moved manually from “ON” to “OFF” to stop blade.

2.1.6.Check Reverse Lockout Mechanism. With blade pedals depressed, shift lever must not go into reverse.

2.1.7.Clean exterior surfaces of cutting deck and engine of any accumulation of dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.1.8.Add fuel to tank after pushing the Rear Engine Rider outside where fumes can dissipate. Make sure fuel filler cap is tight, vent is open and fuel valve is “ON” after refueling. Refer to engine owner’s manual. See Figure 2.2.

2.2OPERATOR’S SEAT ADJUSTMENT

2.2.1.FRONT TO REAR ADJUSTMENT

1.With the engine stopped, loosen the two adjusting knobs and move seat to desired position. After adjustment, tighten knobs securely. If seat does not move after loosening knobs, it may be necessary to loosen the 5/16” patch lock screws located at the rear of the seat using a 1/2 inch wrench. The adjusting knobs need to be positioned as shown so as not to interfere with seat mounting plate when returned to sitting position. See Figure 2.3.

FUEL

FILLER

CAP

FUEL

TANK

ADJUSTING

KNOBS

SHOWN “OFF”

FUEL

OPEN VALVE VENT

TURN FUEL

VALVE “ON”

FIGURE 2.2

OPERATOR’S

SEAT

5/16” PATCH LOCK SCREWS (DO NOT OVERTIGHTEN)

FIGURE 2.3

6

Page 5 Page 7
Page 6
Image 6
Snapper 421622BVE important safety instructions PRE-START Check List, OPERATOR’S Seat Adjustment Front to Rear Adjustment
Page 5 Page 7

421622BVE specifications

The Snapper 421622BVE is a versatile and powerful lawn mower designed for both residential and commercial use, making it an excellent choice for groundskeepers and homeowners alike. This mower blends performance and durability with innovative features that set it apart in the competitive lawn care market.

One of the standout features of the Snapper 421622BVE is its robust engine. It is powered by a reliable 150cc Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and requires minimal maintenance, allowing users to spend more time mowing and less time dealing with equipment issues.

The mower is equipped with a 21-inch cutting deck, which offers a perfect balance between maneuverability and cutting efficiency. This size is especially beneficial for homeowners with smaller to medium-sized yards. The cutting deck features a three-in-one design that allows users to switch between bagging, mulching, or side discharging grass clippings, depending on their preference and lawn care needs.

Another notable characteristic of the Snapper 421622BVE is its ergonomic design. The handle is adjustable, allowing users of varying heights to find a comfortable grip while mowing. This feature helps reduce operator fatigue, which is especially important during extended mowing sessions. Additionally, the mower’s lightweight construction makes it easy to maneuver around obstacles in the yard.

The Snapper 421622BVE also incorporates several cutting technologies that ensure a clean and even cut. The patented variable-speed rear-wheel drive system provides excellent traction and control, allowing users to tackle hills and slopes with ease. The dual-bearings in the wheels enhance durability, ensuring that the mower can withstand rugged use.

Safety features are paramount in the design of the Snapper 421622BVE. It includes a safety key that must be inserted to start the mower, preventing unauthorized use. The blade brake feature ensures that the blades stop quickly when the operator releases the handle, providing additional safety for the user.

In conclusion, the Snapper 421622BVE is a well-rounded lawn mower that combines power, efficiency, and safety features into an exceptional package. Its robust engine, versatile cutting options, ergonomic design, and innovative technologies make it a perfect choice for anyone looking to maintain a healthy and beautiful lawn.