HP Network Direr Software Products manual Creating Reports

458CHAPTER 11: CREATING REPORTS

This report is identical to the standard capacity report except it is filtered to exclude ports that are not above a certain speed.

There are two versions of the report:

■Lists free ports capable of speeds over 10Mbps (100Mbps or more)

■Lists free ports capable of speeds over 100Mbps (1000Mbps or more)

The report lists the following details for each device:

■IP address

■Device type

■Total number of ports on the device

■Total number of free ports on the device.

Devices that do not have any ports of the appropriate speed available are not included in the report. If 3Com Network Director could not obtain the speed of the ports on a switch they will not be included in this report. For reasons why this could occur, refer to the capacity report section.

Reports Dialog Box The Reports dialog box displays a list of all the types of reports that you can generate using 3Com Network Director as shown in Figure 233: