HP Network Direr Software Products manual Applying the changes

560CHAPTER 13: VLAN MANAGEMENT

Applying the changes

To proceed with the changes displayed in the summary stage above, click the Finish button. You will then be presented with a dialog box that shows the progress as the VLANs are edited on each of the switches. After 3Com Network Director has successfully completed the modification of the VLANs on all the switches, you will be presented with a dialog box from which you can launch an Edit VLAN Summary report detailing the changes that were made.

3Com Network Director edits the VLANs on each switch one at a time. If 3Com Network Director fails to edit the VLANs on a switch for whatever reason, 3Com Network Director will stop the configuration process and will not attempt to edit the VLANs on any other switches. An error dialog box will be displayed from which you can launch the Edit VLANs Summary report detailing the error that occurred and those switches that were successfully configured, if any.

If an error occurs during the configuration process, or if you cancel the configuration process, then the VLAN information held in the map may not correctly reflect the VLAN configuration of your network. If this occurs then you should rediscover your network.You can speed up this rediscovery process by limiting the rediscovery to only those subnets and devices for which VLAN configuration was being performed.

Before attempting to modify the VLANs on the selected ports, 3Com Network Director checks the current configuration of each switch to make sure it matches the data held in the map hasn’t changed since your network map was last updated, (e.g. has the VLAN configuration of the switch changed, have the number of units in a stackable switch changed). For the Edit Port VLAN Membership wizard to work correctly, your network map has to be up to date. If the configuration of any of the switches has changed, 3Com Network Director will not attempt to edit the VLANs on any switch. The Edit VLANs Summary report will contain an entry detailing the device that has a changed configuration. In this situation you should re-discover your network to bring your map up to date before launching the Edit Port VLAN Membership wizard again.

If VLANs were successfully modified on all switches, 3Com Network Director will create an info severity event in your event log. If there was an error when modifying the VLANs, 3Com Network Director will create a warning severity event in the event log. The More Detail dialog box for