HP Network Direr Software Products manual Continuous learning, automatic-learning, full security

Components 607

Figure 332 Port Security Panel

The settings for each of the port security parameters will only be applied as part of the configuration template if the associated checkbox is checked. In addition the Port Security feature places restrictions on the values which can be set for the following parameters.

Table 95 Port Security Parameter Restrictions

Parameter	Restriction
Secure Mode	The secure mode of operation can be: no security,
	continuous learning, automatic-learning, full security,
	network login, network login (secure), or network login
	(with NBX).
Intrusion Action	The action to be taken by the device when an
	unauthorized attempt is made to access the network
	through the port can be: no action, disable port, or disable
	port temporarily (20 seconds). The value for this parameter
	can only be set when the secure mode is set to a value
	other than No security.
Number of	The number of addresses that are authorized to access the
Authorized	network through this port must be in the range 1-5. The
Addresses	value for this parameter can only be set when the secure
	mode is set to either automatic-learning or continuous
	learning.