Examples 747

Figure 414 Threshold Settings Dialog Box

14Edit the High stress threshold value and set it to 2000ms. This sets the Warning stress threshold value to 1500ms, which is above the normal response time range for this service monitor.

By setting the thresholds so that the normal response time range is below the warning threshold you ensure that the monitor will not generate events when the mail server is responding normally. As the high threshold is set to 2000ms, any future occurrences of the network event that caused the response time of the mail server to increase to over 2400ms will cause an error event, informing you of the problem when it is still occurring.

15Close the Threshold Settings dialog box by clicking OK.

16Repeat steps 12 – 15 for the SMTP Service and POP3 Service monitors.

Page 751
Image 751
HP Network Direr Software Products manual Threshold Settings Dialog Box