HP Network Direr Software Products manual Using saved 3Com Network Supervisor files

Getting Started 41

If you save an upgraded map from within 3Com Network Director you will be unable to subsequently load it back into 3Com Network Supervisor.

Using saved 3Com Network Supervisor files

You cannot access the following 3Com Network Supervisor files from within 3Com Network Director:

■Saved device backup files, generated using the Device->Backup...

dialog

■Previously generated reports, visible through the History tab of the Tools->Reports...dialog

The Device Warranty feature

If you have previously registered devices on your network for warranty using the Tools->Device Warranty... feature in 3Com Network Supervisor, these devices will not be remembered by 3Com Network Director. After discovering your network, you will be prompted by 3Com Network Director to register every applicable device, whether or not already registered with 3Com.

However, any devices already registered with 3Com will be ignored by the 3Com warranty server - re-registering your devices is harmless.

You will only have to do this once - 3Com Network Director will remember which devices you have registered using 3Com Network Director itself.