HP Network Direr Software Products manual Tools Network Discovery with nothing selected

108CHAPTER 4: DISCOVERING THE NETWORK

Tools > Network Discovery with nothing selected

With no subnets selected in the tree or map, select Network Discovery from the tools menu. The Network Discovery wizard will be launched at the first pane Discovery Type.

Tools > Network Discovery with a discovered subnet selected

If you select one or more discovered subnets in the map or the tree and select Network Discovery from the tools menu, the Network Discovery wizard will be launched at the Specify Subnets pane. (See Specify Subnets Pane on page 111.) The subnets you selected will be included in the list on this pane:

Figure 27 Specify Subnets Pane

The subnet mask and range information are also filled out. You can modify the range information by selecting the appropriate subnet in the list and clicking Edit. If you choose not to modify the range information then the discovery operation will include all ranges that have currently been added to that subnet. If you do modify the range then only the ranges you specify will be used in the discovery operation. However, old ranges will not be discarded, and you can still view them by launching the properties dialog box against the subnet.

You can also start a Network Discovery by right-clicking on a discovered subnet, and selecting Network Discovery. This has the same effect as selecting Network Discovery from the Tools menu.