HP Network Direr Software Products manual Specify Subnets Pane, Adding subnets to the list

Components 111

■Specify subnets – Select this radio button and click Next to specify exactly which subnets you wish to discover and also limit the ranges of IP addresses to discover on each subnet. Use the Specify Subnets pane to enter the subnets you want to discover.

Specify Subnets Pane

This pane is shown if you chose the Specify Subnets option on the first pane of the wizard.

Figure 30 Specify Subnets Pane

If you select one or more subnets in the tree or map view prior to launching the Network Discovery wizard then you will be immediately taken to this step, with the details of the subnets you selected added to the list box.

Once you are happy with the list of subnets you have configured in the list in the Specify Subnets pane of the wizard, and with the address ranges and retry/timeout values associated with each, click Next to move to the next step of the wizard.

Adding subnets to the list

To add a new subnet to the list you wish to discover, use the Add button. This will launch the Add Subnet dialog box below: