HP Network Direr Software Products manual Configuration feature of 3Com Network Director

612CHAPTER 14: BULK CONFIGURATION

Examples	This section provides some examples of how to use the Bulk
	Configuration feature of 3Com Network Director.

Configuring User Following an audit of network security, it has been decided that there is a Accounts need to periodically change the passwords and community strings used

by all of the network specialists. It is decided to have the first changeover take place outside of work hours to avoid disrupting any routine network maintenance.

To do this:

1Ensure that all of the devices on the network are present in the current map. If necessary run a network discovery. See “Launching a discovery” on page 106.

2Launch the Configuration Editor dialog box using the Switch Devices option from the Device > Configure menu.

3Select the User Accounts feature in the configuration summary tree and enable the user accounts table in the feature pane, as shown in Figure 337.

Figure 337 Configuration Template Editor – User Accounts