HP Network Direr Software Products manual Adding an IP routing interface

Components 547

Figure 294 Manually Configuring a VLAN on Unsupported Devices

The Switches: list contains all the switches on which the new VLAN will have to be manually created. The table below lists those ports that will need to be manually added to the new VLAN on the switch currently selected in the list and indicates whether the ports should be tagged or untagged based on the rules explained in “Modifying the list of selected switches and ports” on page 553.

You can either manually configure these unsupported devices at this point in the wizard, or wait until 3Com Network Director has automatically created the VLAN on all the supported devices before manually configuring the unsupported devices. If you choose to manually configure the unsupported devices at this point in the wizard, you can use the Launch button to launch the Telnet or Web management interface for the selected device.

Adding an IP routing interface

The next wizard stage allows you to specify a new IP routing interface(s) to be used with the new VLAN. See “Communication between VLANs” on page 504 for more information.