ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Table 28. IPv6 settings (continued)

Setting

Description

 

 

Default Gateway

Enter the IPv6 address of the ISP gateway to which the wireless access point

 

connects.

Dynamic IPv6 Address

The dynamic IPv6 address that is assigned by the DHCPv6 server on your

 

network. This address does not overwrite the address in the IPv6 Address field.

 

 

Primary DNS Server

Enter the IP address of the primary and secondary DNS servers.

 

A DNS server is a host on the Internet that translates Internet names (such as

 

www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP

 

address of one or two DNS servers to your wireless access point during login. If

Secondary DNS Server

the ISP does not transfer an address, you need to obtain it from the ISP and

 

enter it manually in this field.

 

 

Network Integrity Check

Select this check box to validate that the upstream link is active before allowing

 

wireless associations. Ensure that the default gateway is configured.

 

 

3.Click Apply to save your settings.

Configure the Optional DHCPv6 Server

The wireless access point provides a built-in DHCPv6 server for wireless clients only, which can be especially useful in small networks. When the DHCP server is enabled, the wireless access point provides preconfigured TCP/IP configurations to all connected wireless stations.

Note: For information about how to configure the DHCPv4 server, see

Configure the Optional DHCPv4 Server on page 27.

To configure DHCPv6 server settings:

1.Select Configuration > IP > DHCP Server Settings. The DHCP Server Settings screen displays. The following figure displays the DHCPv6 server settings only. For information about the DHCPv6 server settings, see Configure the Optional DHCPv4 Server on page 27.

Advanced Configuration

101

Page 101
Image 101
NETGEAR WNDAP620 manual Configure the Optional DHCPv6 Server,  To configure DHCPv6 server settings, 101