ProSafe Premium 3 x 3
Table 3. Time system settings (continued)
Setting | Description |
|
|
| |
NTP Client | Enable the Network Time Protocol (NTP) client to synchronize the time of the | |
| wireless access point with an NTP server. By default the Enable radio button is | |
| selected. |
|
|
| |
Use Custom NTP Server | Select this check box if you want to use a custom NTP server. | |
| Note: You need to have an Internet connection to use an NTP server that is | |
| not on your local network. | |
|
|
|
| Hostname / | Enter the host name or IP address of the custom NTP server. |
| IP Address | The default is |
|
| Note: If you use a host name, make sure that you have |
|
| configured a DNS server. For more information, see the next |
|
| section. |
|
|
|
3.Click Apply to save your settings.
Configure the IPv4 Settings
Note: For information about how to configure the IPv6 settings, see
Configure the IPv6 Settings on page 99.
WARNING:
If you enable the DHCP client, the IP address of the wireless access point changes when you click Apply, causing you to lose your connection to the wireless access point. You then need to use the new IP address to reconnect to the wireless access point.
Tip: If you enable the DHCP client on the wireless access point, you can discover the new IP address of the wireless access point by accessing the DHCP server on your LAN, or by using a network IP address scanner application.
To configure the IPv4 settings:
1. Select Configuration > IP > IP Settings. The IP Settings screen displays:
Installation and Basic Configuration
25
