NETGEAR WNDAP620 - page 88

Management and Monitoring
88
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
3. Click Save to export the list of unknown or known APs to a file. A window opens so you can
browse to the location where you want to save the file. The default file name is macList.txt.
If you wish, you can now import the saved list into the Known AP List on the Rogue AP
screen (see Enable and Configure Rogue AP Detection on page 85).
To view the Known AP Lists and save it to a file:
1. Select Monitoring > Rogue AP > Known AP List. The Known AP List screen displays:
Figure 53.
2. Click Refresh to let the wireless access point discover the access points and populate the
Known AP List for the configured wireless mode.
The following table explains the fields of the Known AP List screen:
3. Click Save to export the list of known access points to a file. A window opens so you can
browse to the location where you want to save the file. The default file name is macList.txt.
You can now import the saved list into the Known AP List on the Rogue AP screen (see
Enable and Configure Rogue AP Detection on page 85).
# of Beacons The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
Last Beacon The time stamp that indicates the time when the most recent beacon was
detected.
Table 23. Known AP List fields
Setting Description
MAC Address The MAC address of the known AP.
SSID The SSID that the known AP is using.
Channel The channel that the known AP is using.
Table 22. Unknown AP List fields (continued)
Setting Description