Wireless Configuration and Security
60
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Restrict Wireless Access by MAC Address
For increased security, you can restrict access to an SSID by allowing access to only specific
computers or wireless stations based on their MAC addresses. You can restrict access to
only trusted computers so that unknown computers cannot connect wirelessly to the wireless
access point. MAC address filtering adds an obstacle against unwanted access to your
network, but the data broadcast over the wireless link is fully exposed.
Note: For wireless adapters, you can usually find the MAC address printed
on the wireless adapter.
To restrict access based on MAC addresses:
1. Select Configuration > Security > Advanced > MAC Authentication. The MAC
Authentication screen displays. (The following figure shows some examples.)
Figure 31.
2. Optional: To display the MAC Authentication screen for the 802.11a/na modes, click the
802.11a/na tab.
3. Select the Turn Access Control On check box to enable the access control feature.
4. From the Select Access Control Database drop-down list, select one of the following
database options:
Local MAC Address Database. The wireless access point uses the local MAC
address database for access control. This is the default setting.
Remote MAC Address Database. The wireless access point uses the MAC address
database on an external RADIUS server on the LAN for access control. If you select
this database, you first need to configure the RADIUS server settings (see Configure
RADIUS Server Settings on page 57).