ProSafe Premium 3 x 3
To configure the RADIUS server settings:
1.Select Configuration > Security > Advanced > Radius Server Settings. The Radius Server Settings screen displays.
Figure 30.
2.Specify the settings as explained in the following table:
Table 14. RADIUS server settings for IPv4 and IPv6
Setting | Descriptions |
|
|
| |
Radius Server Settings |
| |
|
|
|
Primary | IPv4 Address or | Enter the IP address of the primary RADIUS server for |
Authentication Server | IPv6 Address | authentication. |
|
|
|
| Port | Enter the number of the UDP port on the wireless access point |
|
| that is used to access the primary RADIUS server for |
|
| authentication. The default port number is 1812. |
|
|
|
| Shared Secret | Enter the shared key that is used between the wireless access |
|
| point and the primary RADIUS server during authentication. |
|
|
|
Wireless Configuration and Security
58
