Management and Monitoring
73
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Use the Reset Button to Restore Factory Default Settings

To restore the factory default settings when you do not know the login user name, login
password, or IP address, you need to use the Reset button on the rear panel of the wireless
access point (see Figure 2 on page 13).
To restore the factory default settings using the Reset button:
1. Using a sharp object, press and hold the Reset button for about 5 seconds (until the Test
LED blinks ra p id ly ) to reset the wireless access point to factory def aults settings.
Note: Pressing the Reset button for a shorter time simply causes the
wireless access point to reboot.
2. Release the Reset button.
During the restoration process, the wireless access point automatically restarts. The
restoration process typically takes about 1 minute. When the Test LED turns off, wait a
few more seconds before doing anything with the wireless access point.
Reboot the Wireless Access Point without Restoring the Default Configuration
If you do not have physical access to the wireless access point to switch it off and on again,
you can use the software to reboot the wireless access point.
To reboot the wireless access point:
1. Select Maintenance > Reset > Reboot AP. The Reboot AP screen displays:
Figure 42.
2. Select the Yes radio button. (By default, the No radio button is selected.)
3. Click Apply to reboot the wirele s s a cc es s p o in t.