NETGEAR WNDAP620 - page 86

Management and Monitoring
86
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 51.
2. Optional: To enable and configure rogue AP detection for the 802.11a/na modes, click the
802.11a/na tab.
3. Select the Turn Rogue AP Detection On check box to enable rogue AP detection.
4. Specify the detection policy by making a selection from the Rogue AP Detection Policy
drop-down list:
•Mild. The wireless access point scans for rogue access points every 10 seconds.
•Moderate. The wireless access point scans for rogue access points every 5 seconds.
This is the default setting.
•Aggressive. The wireless access point scans for rogue access points every second.
5. Click Refresh to let the wireless access point discover the access points and populate the
Unknown AP List.
6. In the Unknown AP List, select individual check boxes for access points, or select all access
points by selecting the check box in the column heading.
7. Click Move to transfer the access points from the Unknown AP List to the Known AP List.
8. Click Apply to save your settings.
To remove APs from the Known AP List and return them to the Unknown AP List:
1. In the Known AP List, select individual check boxes for access points, or select all
access points by selecting the check box in the column heading.
2. Click Delete.
To import a file with a precompiled list of access points into the Known AP List:
1. Take one of the following actions:
•Select the Replace radio button to let the imported list of access points replace the
existing Known AP List.