4. Management and Monitoring | 4 | |
| ||
|
|
|
This chapter describes how to use the management and monitoring features of the wireless access point. The chapter includes the following sections:
•Enable Remote Management
•Upgrade the Wireless Access Point Software
•Manage the Configuration File or Reset to Factory Defaults
•Change the Administrator Password
•Manage User Accounts
•Enable the Syslog Server
•Monitor the Wireless Access Point
•Enable Rogue AP Detection and Monitor Access Points
•Configure Wireless Intrusion Detection and Prevention
Enable Remote Management
•SNMP Management
•Secure Shell and Telnet Management
Both Simple Network Management Protocol (SNMP) and the remote console Secure Shell (SSH) are enabled by default, which allows for remote management of the wireless access point from a client running SNMP management software, as well as from an SSH client. The Telnet console is disabled by default.
SNMP Management
To set up an SNMP management interface:
1. Select Maintenance > Remote Management > SNMP. The SNMP screen displays:
64
