ProSafe Premium 3 x 3
2.Configure the settings as explained in the following table:
Table 2. Basic general system settings
Setting | Description |
|
|
Access Point Name | This unique name is the wireless access point NetBIOS name. The name is printed |
| on the rear label of the wireless access point. The default is netgearxxxxxx, in which |
| xxxxxx represents the last 6 digits of the wireless access point MAC address. You |
| can replace the default name with a unique name up to 15 characters long. The |
| access point name can be retrieved through SNMP. |
|
|
Country / Region | From the Country / Region |
| access point is installed. |
| Note: It might not be legal to operate this wireless access point in a region other than |
| one of those identified in this field. |
3.Click Apply to save your settings.
To configure time settings:
1.Select Configuration > System > Basic > Time. The Time screen displays:
Figure 12.
2.Configure the settings as explained in the following table:
Table 3. Time system settings
Setting | Description |
|
|
Time Zone | Select the time zone to match your location. |
|
|
Current Time | This is a nonconfigurable field that displays the current date and time. |
|
|
Installation and Basic Configuration
24
