ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Form for 802.11a/an Modes

Print this page and store the security information in a safe place:

SSID: The service set identifier (SSID) identifies the wireless local area network. You can customize it by using up to 32 alphanumeric characters. Write your SSID on the line.

SSID: ___________________________________

The SSID in the wireless access point is the SSID you configure on the wireless adapter card. All wireless nodes in the same network need to be configured with the same SSID.

WEP key size and authentication

Choose the key size by circling one: 64, 128, or 152 bits.

Choose the authentication type by circling one: open system or shared key.

Passphrase: ___________________________________

Note: If you select shared key, the other devices in the network cannot connect unless they are set to shared key and have the same keys in the same positions as those in the wireless access point.

WPA-PSK (pre-shared key) and WPA2-PSK Record the WPA-PSK passphrase:

WPA-PSK passphrase: ________________________________

Record the WPA2-PSK passphrase:

WPA2-PSK passphrase: ________________________________

WPA RADIUS settings

For WPA, record the following settings for the primary and secondary RADIUS servers: Server name/IP address: Primary ________________ Secondary _________________

Port: ___________________________________

Shared secret: ___________________________________

WPA2 RADIUS settings

For WPA2, record the following settings for the primary and secondary RADIUS servers: Server name/IP address: Primary ________________ Secondary _________________

Port: ___________________________________

Shared secret: ___________________________________

------------------------------------------------End of Form--------------------------------------------------------

Wireless Configuration and Security

47

Page 47
Image 47
NETGEAR WNDAP620 manual Form for 802.11a/an Modes