ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Table 14. RADIUS server settings for IPv4 and IPv6 (continued)

Setting

Descriptions

 

 

 

 

Secondary

IPv4 Address or

Enter the IP address of the secondary RADIUS server for

Authentication Server

IPv6 Address

authentication. The secondary RADIUS server is used when the

 

 

primary RADIUS server is not available.

 

 

 

 

Port

Enter the number of the UDP port on the wireless access point

 

 

that is used to access the secondary RADIUS server for

 

 

authentication. The default port number is 1812.

 

 

 

 

Shared Secret

Enter the shared key that is used between the wireless access

 

 

point and the secondary RADIUS server during authentication.

Primary

IPv4 Address or

Enter the IP address of the primary RADIUS server for

Accounting Server

IPv6 Address

accounting.

 

 

 

 

Port

Enter the number of the UDP port on the wireless access point

 

 

that is used to access the primary RADIUS server for accounting.

 

 

The default port number is 1813.

 

 

 

 

Shared Secret

Enter the shared key that is used between the wireless access

 

 

point and the primary RADIUS server during the accounting

 

 

process.

 

 

 

Secondary

IPv4 Address or

Enter the IP address of the secondary RADIUS server for

Accounting Server

IPv6 Address

accounting. The secondary RADIUS server is used when the

 

 

primary RADIUS server is not available.

 

 

 

 

Port

Enter the number of the UDP port on the wireless access point

 

 

that is used to access the secondary RADIUS server for

 

 

accounting. The default port number is 1813.

 

 

 

 

Shared Secret

Enter the shared key that is used between the wireless access

 

 

point and the secondary RADIUS server during the accounting

 

 

process.

 

 

 

Authentication Settings

 

Reauthentication

The interval in seconds after which the supplicant is reauthenticated with the

Time (Seconds)

RADIUS server. The default interval is 3600 seconds (1 hour). Enter 0 to disable

 

reauthentication.

 

Update Global Key

Select the check box to allow the global key update, and enter the interval in

Every (Seconds)

seconds. The check box is selected by default, and the default interval is

 

1800 seconds (30 minutes). Clear the check box to prevent the global key update.

3.Click Apply to save your settings.

Wireless Configuration and Security

59

Page 59
Image 59
NETGEAR WNDAP620 manual Authentication Settings