ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

e.If you want to enable wireless client association while the wireless access point functions as a point-to-point bridge, select the Enable Wireless Client Association check box.

f.Click Edit to configure the security profile settings. The Edit Security Profile screen displays:

Figure 69.

g.Specify the settings as explained in the following table:

Table 36. Point-to-point bridge profile and authentication settings

Setting

Description

 

 

Profile Definition

 

 

 

Profile Name

Enter a profile name that is easy to remember. The default name is

 

NETGEAR-WDS-1.

 

 

Remote MAC Address

Enter the MAC address of the remote wireless access point (the MAC address

 

of AP2 on LAN Segment 1 in Figure 67 on page 119).

 

 

Authentication Settings

 

 

Network

From the Network Authentication drop-down list, select Open System,

Authentication and

WPA-PSK, or WPA2-PSK. Your selection determines the options that the Data

Data Encryption

Encryption drop-down list provides, and whether the WPA Passphrase

 

(Network Key) field displays.

 

 

Advanced Configuration

120

Page 120
Image 120
NETGEAR WNDAP620 Point-to-point bridge profile and authentication settings, 120, Setting Description Profile Definition