NETGEAR WNDAP620 manual Command-Line Reference, 147

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

-send-notifications		--Administrator/superuser mail address
-interface>		--Select wireless lan interface
-wlan>		--Wireless LAN interface setting
-2.4GHz>		--2.4 GHz wireless LAN interface setting
-aggregation-length		--Aggregated packet size
-ampdu		--Aggregated MAC Protocol Data Unit
-beacon-interval		--Wireless beacon period in TU(1024 us)
-channel		--Wireless channel (depends on country and wireless mode)
-channelwidth		--Wireless channel width
-dtim-interval		--Wireless DTIM period in beacon interval
-fragmentation-length		--Wireless fragmentation threshold(even only)
-guardinterval		--Interval (from interference from other transmissions)
-knownap-add		--Add known access point
-knownap-del		--Delete known access point
-macacl-add		--Add wireless access control (ACL)
-macacl-database		--Delete wireless access control (ACL) database
-macacl-del		--Delete wireless access control (ACL)
-mcsrate		--Transmit data rate
-mode		--Enable wireless access control (ACL)
-operation-mode		--Wireless operation mode
-power		--Wireless transmit power
-preamble		--Wireless preamble (only effect on 802.11b rates)
-radio		--Enable wireless radio
-rate		--Wireless transmission date rate
-rifs-transmission		--Enable successive frame transmission at different
		transmit powers
-rogue-ap-detection		--Enable rogue access point detection
-rts-threshold		--Wireless RTS/CTS threshold
-11dSupport		--IEEE802.11d status
-client-isolation		--Client isolation status
-create-qos-policy		--Create QoS (Quality of service) policy
-create-qos-classification		--Create Qos (Quality of service) classification
-delete-qos-policy		--Delete QoS (Quality of service) policy
-delete-qos-classification		--Delete Qos (Quality of service) classification
-security-profile>		--Create security profile
-1>		--1st security profile
	-authentication	--Wireless authentication type
	-encryption	--Data encryption
	-hide-network-name	--Hide network name
	-key1	--Wireless wep key 1
	-key2	--Wireless wep key 2
	-key3	--Wireless wep key 3
	-key4	--Wireless wep key 4
	-keyno	--Key number
	-name	--Profile name
	-presharedkey	--Pre-shared key
	-security-separation	--Disable associated wireless client communication
	-ssid	--Network name (1-32 chars)
	-status	--Profile status
	-vlan-id	--VLAN id
	-wep-pass-phrase	--Wireless wep passphrase key
	-wepkeytype	--Wireless wep key type
	-apply-incoming-QoSpolicy	--Apply QoS policy as a incoming
	-apply-outgoing-QoSpolicy	--Apply QoS policy as a outgoing
	-delete-incoming-QoSpolicy--Delete incoming QoS policy

Command-Line Reference

147