NETGEAR WNDAP620 manual  To configure a point-to-point wireless network, 119

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Wireless PC card

in a notebook computer

Wireless PC card

in a notebook computer

Point-to-point	Point-to-point
bridge mode
	bridge mode
Router	Hub or switch

Figure 67.

To configure a point-to-point wireless network:

1.Configure the wireless access point (AP1 on LAN Segment 1 in the previous figure) as

apoint-to-point bridge:

a.Select Configuration > Wireless Bridge. The Bridging screen displays (see the following figure).

b.Optional: To display the Bridging screen for the 802.11a/na modes, click the 802.11a/na tab.

c.Select the Enable Wireless Bridging check box. The Local MAC Address field is a nonconfigurable field that shows the MAC address of the wireless access point.

d.Select the Wireless Point-to-Point Bridge radio button. The screen adjusts.

Figure 68.

Advanced Configuration

119