ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Secure Shell and Telnet Management

To configure remote console features:

1.Select Maintenance > Remote Management > Remote Console. The Remote Console screen displays:

Figure 35.

2.Enable or disable the remote console features:

Secure Shell (SSH). To enable this feature, select the Enable radio button, which is the default setting. Select the Disable button to disable the feature.

Telnet. To enable this feature, select the Enable radio button. Select the Disable button to disable the feature, which is the default setting.

3.Click Apply to save your settings.

To manage the wireless access point over a Telnet connection:

1.Connect an Ethernet cable to the console port of the wireless access point.

2.Connect the other end of the cable to a VT100/ANSI terminal or a workstation.

If you attach a PC, Apple Macintosh, or UNIX workstation, start a secure terminal emulation program, and configure the terminal emulation program to use the following settings:

Baud rate: 9600 bps

Data bits: 8

Parity: none

Stop bit: 1

Flow control: none

3.Start a secure Telnet session from the terminal or workstation to the wireless access point. A screen similar to the following displays:

Management and Monitoring

66

Page 66
Image 66
NETGEAR WNDAP620 manual Secure Shell and Telnet Management,  To configure remote console features