NETGEAR WNDAP620 The following table explains the fields of the System screen:

Management and Monitoring

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

The following table explains the fields of the System screen:

Setting Description

Access Point Information

Access Point Name The NetBIOS name. For info rmation about how to change the default name, see

Configure Basic General System Settings and Time Settings on page 23.

Ethernet MAC Address The MAC address of the wireless access point’s Ethernet port.

Wireless MAC Address The MAC address of the wireless access point’s wireless card.

Ethernet LLDP Enabled indicates that LLDP is enabled. Disabled indicates that it is not.

Country/Region The country or region for which the wireless access point is licensed for use. For

information about how to change the country or region, see Configure Basic General

System Settings and Time Settings on page 23.

Note: It might not be legal to operate this wireless access point in a country or region

other than one of those identified in this field.

Firmware Version The version of the firmware that is currently installed.

Serial Number The serial number of the wireless access point.

Current Time The current time. For information about how to change the time settings, see

Configure Basic General System Settings and Time Settings on page 23.

Current IPv4 Settings

For information about how to change any of these IP settings, see Configure the IPv4 Settings on page 25.

IP Address The IPv4 address of the wireless access point.

Subnet Mask The subnet mask for the address of the wireless access point.

Default Gateway The default IPv4 gateway for the wireless access point communication.

DHCP Client Enabled indicates that the current IP address was obtained from a DHCPv4 server on

your LAN network. Disabled indicates a static IP configuration.

Current IPv6 Settings

For information about how to change any of these IP settings, see Configure IPv6 Settings and Optional

DHCPv6 Server Settings on page 99.

IPv6 Address The default IPv6 address of the wireless access point.

Prefix Length The prefix length for the address of the wireless access point.

Dynamic IPv6 Address The dynamically assigned IPbv6 address if the DHCPv6 server has the stateful

option enabled.

Default Gateway The default IPv6 gateway for the wireless access point communication.

LAN IPv6 Link-Local

Address This is an automatically generated IPv6 address that uses the IPv4 address in the

interface portion of its address.