NETGEAR WNDAP620 manual 152

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

-encryption	--Data encryption
-name	--Profile name
-presharedkey	--Preshared key
-remote-mac	--Remote MAC
-status	--Profile status
-wep-pass-phrase	--Wireless wep passphrase key
-wepkey	--Wireless wep key
-wepkeytype	--Wireless wep key type
-wmm>	--WMM settings
-ap-data0-best-effort	--Access point best effort voice data
-ap-data1-background	--Access point low-priority data
-ap-data2-video	--Access point video data
-ap-data3-voice	--Access point voice data
-powersave
-station-data0-best-effort	--Station best effort voice data
-station-data1-background	--Station low-priority data
-station-data2-video	--Station video data
-station-data3-voice	--Station voice data
-support	--Support
-5GHz>	--5.0 GHz wireless LAN interface setting
-aggregation-length	--Aggregated packet size
-ampdu	--Aggregated MAC Protocol Data Unit
-beacon-interval	--Wireless beacon period in TU(1024 us)
-channel	--Wireless channel (depends on country and wireless mode)
-channelwidth	--Wireless channel width
-dtim-interval	--Wireless DTIM period in beacon interval
-fragmentation-length	--Wireless fragmentation threshold(even only)
-guardinterval	--Interval (from interference from other transmissions)
-knownap-add	--Add known access point
-knownap-del	--Delete known access point
-macacl-add	--Add wireless access control (ACL)
-macacl-database	--Delete wireless access control (ACL) database
-macacl-del	--Delete wireless access control (ACL)
-mcsrate	--Transmit data rate
-mode	--Enable wireless access control (ACL)
-operation-mode	--Wireless operation mode
-power	--Wireless transmit power
-preamble	--Wireless preamble (only effect on 802.11b rates)
-radio	--Enable wireless radio
-rate	--Wireless transmission date rate
-rifs-transmission	--Enable successive frame transmission at different
	transmit powers
-rogue-ap-detection	--Enable rogue access point detection
-rts-threshold	--Wireless RTS/CTS threshold
-11dSupport	--IEEE802.11d status
-client-isolation	--Client isolation status
-create-qos-policy	--Create QoS (Quality of service) policy
-create-qos-classification	--Create Qos (Quality of service) classification
-delete-qos-policy	--Delete QoS (Quality of service) policy
-delete-qos-classification	--Delete Qos (Quality of service) classification

Command-Line Reference

152