NETGEAR WNDAP620 manual 115, Mac

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Table 33. QoS classification settings (continued)

Setting	Description
Match Frame	802.1P	From the Match Classifications drop-down list, select the CoS priority
Fields and Match		value against which the information in the IP header needs to be
Classifications		matched:
(continued)		•	Routine(0)
		•	Priority(1)
		•	Immediate(2)
		•	Flash(3)
		•	Flash Override(4)
		•	Critic/CCP(5)
		•	Inter Control(6)
		•	Network Control(7)
	IP Protocol	In the Match Classifications field, enter the IP protocol value against
		which the information in the IP header needs to be matched. A list of
		protocol values is available at
		http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml.
	Ether Type	In the Match Classifications field, enter the Ether type value against
		which the information in the IP header needs to be matched. A list of
		Ether type values is available at
		http://standards.ieee.org/develop/regauth/ethertype/eth.txt.
	Source MAC	In the Match Classifications field, select or enter the source MAC
		address against which the information in the IP header needs to be
		matched.
		To select the MAC address of a wireless client that is connected to the
		wireless access point:
		1.	Select the radio button to the left of the Match Classifications
			drop-down list.
		2.	From the drop-down list, select a MAC address.
		To enter a MAC address:
		1.	Select the radio button to the right of the Match Classifications
			drop-down list.
		2.	In the field to the right of the radio button, enter a MAC address.
	Destination	In the Match Classifications field, select or enter the destination MAC
	MAC	address against which the information in the IP header needs to be
		matched.
		To select the MAC address of a wireless client that is connected to the
		wireless access point:
		1.	Select the radio button to the left of the Match Classifications
			drop-down list.
		2.	From the drop-down list, select a MAC address.
		To enter a MAC address:
		1.	Select the radio button to the right of the Match Classifications
			drop-down list.
		2.	In the field to the right of the radio button, enter a MAC address.

Advanced Configuration

115