NETGEAR WNDAP620 - page 32

Installation and Basic Configuration
32
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 16.
2. Specify the wireless mode in the 5 GHz band by selecting one of the following radio buttons:
•11a. 802.11n-compliant devices can connect to the access point because they are
backward compatible.
•11na. This is the default setting. If you keep the default setting, go to Step 5.
When you change the wireless mode, the Turn Radio On check box is automatically
cleared, and all fields, buttons, and drop-down lists onscreen are masked out.
3. Turn on the radio by selecting the Turn Radio On check box. A pop-up screen displays.
Note: Under normal conditions, you want the radio to be turned on. Turning off
the radio disables access through the wireless access point, which can be
helpful for configuration, network tuning, or troubleshooting activities.
4. Click OK to confirm the change of wireless mode. The change does not take effect until you
click the Apply button after you have completed the wireless configuration.