NETGEAR WNDAP620 manual Wpa-Psk, WPA2-PSK, Vlan ID

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620

Table 10. Profile authentication settings (continued)

Setting	Description
Network Authentication	WPA & WPA2 with	Configure the RADIUS server setting. TKIP + AES
and Data Encryption	Radius	encryption is the default encryption.
(continued)		See Configure WPA with RADIUS, WPA2 with RADIUS,
		and WPA & WPA2 with RADIUS on page 55.
		Note: This setting allows clients to connect through either
		WPA with TKIP or WPA2 with AES.
	WPA-PSK	Enter a WPA passphrase and select TKIP or TKIP + AES
		encryption.
		See Configure WPA-PSK,WPA2-PSK, and WPA-PSK &
		WPA2-PSKon page 56.
	WPA2-PSK	Enter a WPA passphrase and select AES or TKIP + AES
		encryption.
		See Configure WPA-PSK,WPA2-PSK, and WPA-PSK &
		WPA2-PSKon page 56.
		Note: Select this setting only if all clients support WPA2.
	WPA-PSK &	Enter a WPA passphrase. TKIP + AES encryption is the
	WPA2-PSK	default encryption.
		See Configure WPA-PSK,WPA2-PSK, and WPA-PSK &
		WPA2-PSKon page 56.
		Note: This setting allows clients to connect through either
		WPA with TKIP or WPA2 with AES.
Wireless Client Security	If you enable wireless client security separation by selecting Enable from the
Separation	drop-down list, the associated wireless clients cannot communicate with each
	other. By default, Disable is selected from the drop-down list. This feature is
	intended for hotspots and other public access situations.
VLAN ID	Enter the VLAN ID to be associated with this wireless security profile. The
	default VLAN ID is 1. The VLAN ID needs to match the VLAN ID that is used by
	the other devices in your network.

6.Optional: In the QoS Policies section of the screen, select a QoS policy from the Incoming drop-down list, Outgoing drop-down list, or both. Depending on your selection, the policy is applied to incoming packets, outgoing packets, or both incoming and outgoing packets, and is displayed in the Policy Details fields.

Note: To be able to select a QoS policy, you first need to have configured one or more policies (see Configure Quality of Service Policies on page 112).

7.Click Apply to save your settings.

Wireless Configuration and Security

52