HP Network Direr Software Products 878

874Appendix E: REPORT EXAMPLES

Webcache Redirection - redirection table is full This report will be generated when a device capable of performing Webcache Redirection and a Webcache are discovered but the redirection table maintained by the device is full and this table does not contain an entry for the Webcache listed.

Webcache not set up for inline mode (1) This report will be generated when a device capable of performing Layer 4 Redirection and a Webcache in inline mode are discovered, but either the WAN or LAN ports on the Webcache are not connected to the rest of the network. To take advantage of inline mode, the Webcache must have both the LAN and WAN ports connected.

For this network configuration, you are recommended to change the Webcache to transparent mode instead of inline mode, and enable Layer Redirection on your Layer 4 capable device so it directs Layer 4 traffic to the Webcache.

Webcache not set up for inline mode (2) This report will be generated when no devices capable of performing Layer 4 Redirection are found, and a Webcache in inline mode is discovered, but either the WAN or LAN ports on the Webcache are not connected to the rest of the network. To take advantage of inline mode, the Webcache must have both the LAN and WAN ports connected.

For this network configuration, you are recommended to either connect your Webcache LAN and WAN ports to the network, or change the Webcache to forward proxy mode instead of inline mode.

Responses to Enable Webcache Redirection Request Clicking on the hyperlink presented in the Webcache Redirection - not enabled report will result in one of the responses below being returned to the client browser.

Successful Configuration Successful configuration of Webcache Redirection and alteration of the Webcache caching mode will result in the following status text being returned to the client browser:

Webcache Redirection was successfully configured. It will take around 20 seconds for the changes to take effect. Click the back button to return to the Misconfigurations and Optimizations report.