476CHAPTER 12: CONFIGURING SINGLE DEVICES

Figure 239 IP Ping Console Dialog Box

The dialog box pre-fills the command line text box with the command ‘ping’ followed by the IP address of the device you have selected. The command line is provided so that you can specify additional command line options to the ping command. When you click Start, the ping command is run and its output is displayed in the Output window.

Trace Route The Trace Router feature enables you to run the Windows system ‘tracert’ utility. This utility lets you trace the router path from the management station to the device you’re interested in. If the device has more than one IP interface, the Trace Route menu will contain submenus for each IP address the device has.

When you select a device and click on Trace Route... from the right-click menu, a console dialog box is launched as shown in Figure 240:

Page 480
Image 480
HP Network Direr Software Products manual Configuring Single Devices