HP Network Direr Software Products manual Restrictions Backing Up and Restoring 3Com Devices

838APPENDIX A: SUPPORTED DEVICES

	Minimum Agent
Device Type	Version
3Com Wireless Access Point 8750	2.03
3Com Network Jack family	1.0
3Com Switch 7700	1.0
3Com Switch 7700R	1.0
3Com Router 3012	1.2
3Com Router 3013	1.2
3Com Router 3015	1.2
3Com Router 3016	1.2
3Com Router 3018	1.2
3Com Router 5009	1.2
3Com Router 5231	1.2
3Com Router 5640	1.2
3Com Router 5680	1.2

The SuperStack 3 Switch 4400 SE device is supported by Backup, Restore and Setup. However, a License Key is required to enable the Backup and Restore feature in the agent software. Please refer to the user documentation supplied with your switch for details of how to obtain the appropriate License Key.

Restrictions Backing Up and Restoring 3Com Devices

1The Device Restore and Device Setup operations may need to initialize target devices before applying the selected configuration.

Initializing a device, or applying a configuration that is not consistent with the surrounding network devices, could result in network loops or other problems, which may bring down the network to which the device is attached.

If you are using any of the following features on the device, or they are part of the configuration being applied, you should disconnect the device from the network, connect it to this management station either directly or via a single hub or switch, before attempting the Device Restore or Setup operation.

-VLANs

-Spanning Tree