Error messages
The following error messages may appear to indicate the status of the Glasstron or input signal.
OUT OF SCAN RANGE
The input signal does not match the supported specification.
Change the screen resolution on your PC. For details of the signal compatibility, see “Signal compatibility” (page 34).
NO INPUT SIGNAL
The signal is not input.
•Make sure that the
•Make sure that the connected equipment is turned on.
•Make sure that the your PC is not in the power saving mode.
HIGH TEMPERATURE
The Glasstron temperature is high.
Turn off the Glasstron for a while, then turn on again.
Note
If you cover the ventilation hole of the power supply box, an error may occur due to a rise in temperature. In addition, it may cause a fire or malfunction of the unit.
