Using the Glasstron
You need to set a password the first time you use the Glasstron or after you reset the Glasstron. Set the password following the procedure in “Setting the password” (pages 27 and 28).
Before you start…
Be sure to follow the procedures in “Connecting the Glasstron” (pages 14 to 19) and “Wearing the Glasstron” (page 20).
1 | Turn on the Glasstron using the POWER switch, then press PUSH |
| DISPLAY jog dial. |
Change the display language before pressing the jog dial, if necessary.
POWER / POWER SAVING
ON / OFF 
Screen
DISPLAY LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
SEL 
EXEC
If you have set the Glasstron to operate without a password, go to step 3.
2 | Turn the PUSH DISPLAY jog dial to enter the first number of your | ||
password, then press the jog dial. Enter the second and third | |||
| numbers in the same way. |
|
|
|
| ENTER THE THIRD NUMBER | |
|
| OF YOUR PASSWORD. | |
|
|
| 123 |
|
| SEL | EXEC |
| PUSH DISPLAY | Entered password | |
|
|
| |
|
| INCORRECT PASSWORD. | |
|
| ENTER THE FIRST NUMBER | |
|
| AGAIN. |
|
| If you enter a wrong password, the |
| 1 |
| message shown on the right appears. |
|
|
| Enter the correct password. |
|
|
|
| SEL | EXEC |
| If you have entered a wrong password |
|
|
| more than five times, after about ten | INCORRECT PASSWORD. | |
| seconds, the Glasstron turns off | SEE THE USER’S MANUAL. | |
|
|
| |
| automatically. |
|
|
|
|
| continued |
