Adjusting the sound and picture (continued)
Adjusting the RGB signal
It is recommended to adjust the picture after installing the information file included in the supplied Windows 95/Windows 98 PC Glasstron Information disk, or the screen adjustment disk for Macintosh. For details on how to install the information file, refer to the instruction manual “Windows 95/Windows 98 PC Glasstron Information Disk/screen adjustment disk for Macintosh”.
Note
When you display the picture on both the LCD display of the notebook PC and on the Glasstron, you cannot adjust the picture on the Glasstron because of the mismatch of the output signal frequencies with some notebook PCs. In this case, change the display mode on your PC to the external monitor only. Then, change the screen resolution according to the list on “Signal compatibility” (page 34).
V CENT
Turn the jog dial to adjust the centre of the picture, then press the jog dial.
V CENT
ADJ 
EXEC
TRACKING
Turn the jog dial until the stripes on the picture disappear, then press the jog dial.
TRACKING
ADJ 
EXEC
H CENT | SYNC |
Turn the jog dial to adjust the centre of the picture, then press the jog dial.
Turn the jog dial to adjust the clearance of the picture, then press the jog dial.
H CENT
ADJ 
EXEC
SYNC
ADJ 
EXEC
