Sony PLM-S700E instruction manual Connecting a Macintosh desktop models, Connecting the Glasstron

Connecting the Glasstron (continued)

Connecting a Macintosh (desktop models)

Depending on the model, you may need to use the supplied Macintosh adapter to connect the RGB signal cable (supplied) as shown below. When you connect the Glasstron to your Macintosh, set the PC-VIDEO switch on the power supply box to “PC.”

to monitor port	?		/	to RGB signal cable
of Macintosh
	(D-Sub 15-pin,	to monitor	VGA type connector
	male)	port	(HD15, female)
			Power supply box
		Set the PC-VIDEO switch
		to “PC.”

to monitor port

Macintosh adapter

to audio port

PC RGB

AUDIO

to PC AUDIO	to RGB connector
connector

Audio cable (supplied)

RGB signal cable (supplied) : Signal flow

Notes on connection

•The supplied display adapter does not support the models before the Macintosh II series.

•Set the display setting to the 16-inch display mode (832 ⋅ 624) or the 13-inch display mode (640 ⋅ 480). The Glasstron does not display the image with the 19-inch display mode (1024 ⋅ 768) or more.

16-GB